Motorola PCS telephone - Manual (Page 49)

Using the Options Menu 47
Outgoing Messages
This option is used to view and manage any outgoing messages.
These messages will be stored on your SIM card. When you select
this option, the total number of messages will be displayed
followed by the first message in the list.
A You cannot send an outgoing message until the Message
Service Center number has been set. See ‘Message Settings’
on page 48 for more information.
Press O when viewing any message to enter the Go to Next
Message , Send Message , Edit Message and Delete
Message submenu. See ‘How to Read SMS Messages’ on page
45 for more information on navigating through the messages.
Go to Next Message
This option will display the next outgoing message.
Send Message
If you select this option you will be prompted for a phone
number, enter the number and then press O to send the
message.
Edit Message
This option allows you to use the Message Editor to edit the
selected message and then to either send the modified message
or store it in your Outgoing Messages list. See ‘How to Create
and Edit SMS Messages’ on page 45 for more information on
using the Message Editor.
Delete Message
This option will delete the currently viewed message.
Message Editor
The Message Editor is used to create a new message or edit the
currently selected message. Once selected, choose to either
Send
Message or Store Message in your Outgoing Messages list.
See ‘How to Create and Edit SMS Messages’ on page 45 for more
information on using the Message Editor.
Cell Broadcast
This option is used to set the cell broadcast settings. The option
has two settings,
On or Off .
If you change the setting to On , you will be asked to choose a
channel.
Please contact your Service Provider for a list of available channels
and the information they provide.
While a broadcast message is scrolling across the display, you can
stop and start it by pressing *. Press # to restart the
message from the beginning. If you want to remove the message
from the display, press C followed by O.
A If you need to use * and # for their normal functions
while you are receiving a cell broadcast message, you must
first remove the message.
i E7 to access Message Editor