Motorola PCS telephone - Manual (Page 54)

Using the Options Menu 52
jNew Security Code
The security code is used to control access to security and other
options within the menus.
This option is used to change the security code, which is set by
Motorola to 000000.
Once selected, you will be asked to enter the current security
code before you can proceed.
You will then be asked to enter a new six-digit code to replace
the old security code.
A In order to safeguard your phone, you should change your
security code from the factory setting as soon as possible.
jExtended Menus
This option is used to switch the extended menus on or off.
If the extended menu option is switched off, you will not be able
to access any of the extended features.
The option has two settings, On or Off .
jLanguage Selection
This option is used to change the language for display messages.
The option has multiple settings of English, French, and Spanish.
The automatic selection will display English.
When you select a language, all further display prompts and help
messages will be in the selected language.
jChange Greeting
This option is used to change the message displayed when you
switch on your phone.
Once selected, you will be able to enter a new greeting of up to
24 characters. See ‘How to Enter Alphabetic Characters’ on page
32 for more information.
The new greeting will be displayed when your phone is next
switched on.
Battery Saving Mode
This option can help you to conserve battery power. Also known
as DTX (Discontinuous Transmission), this feature will cause your
phone to operate at reduced power when you are not talking.
The option has two settings, On or Off .
jSelect Keypad Tones
This option allows you to change or disable tones you hear when
you press a key.
The option has three settings, Normal Tones , Single Tone , or
No Tones .
i Press and hold M. Extended Menus will be temporarily
activated until you exit the Options Menu.