Miller Electric Millermatic 180 - Manual (Page 32)

.
A complete Parts List is available on-line at www.MillerWelds.com
OM-225 311 Page 28
5-5. Weld Parameter Chart For 115 VAC Model w/Factory Set
Non-Wire Speed Tracking Mode
1. Number on left of
slash is Voltage
Knob Setting.
(Example: 4.5 / 65)
2. Number on right
of slash is Wire
Speed Knob Setting.
(Example: 4.5 / 65)
Refer to chart below to select Voltage and Wire Speed based on
thickness of material being welded.
Solid Wire
ER70S−6
(DCEP)
Solid Wire
ER70S−6
(DCEP)
Flux Core
E71T−11
(DCEN)
Stainless
Steel
(DCEP)
Selecting Wire, Gas and Control Settings for Aluminum
.030” (0.8 mm)
.035” (0.9 mm)
Aluminum w/
Opt. Spool Gun Aluminum
4043ER 100% Argon