Miller Electric Millermatic 180 - Manual (Page 36)

.
A complete Parts List is available on-line at www.MillerWelds.com
OM-225 311 Page 32
5-7. Weld Parameter Chart For 230 VAC Model w/Factory Set
Non-Wire Speed Tracking Mode
.030” (0.8 mm)
.035” (0.9 mm)
1. Number on left of
slash is Voltage
Knob Setting.
(Example: 4.5 / 55)
2. Number on right
of slash is Wire
Speed Knob Setting.
(Example: 4.5 / 55)
.045” (1.2 mm) #000069
.035 − .045” (0.9 − 1.2 mm) #194012
.030 − .035” (0.8 − 0.9 mm) #194011
.024” (0.6 mm) #194010
.035” (0.9 mm) #000068
.030” (0.8 mm) #000067
.024” (0.6 mm) #087299
(DCEP)
(DCEP)
(DCEN)
Refer to chart below to select Voltage and Wire Speed based on
thickness of material being welded.
Aluminum
Spool Gun
Aluminum
4043ER
100% Argon
(DCEP)
Stainless
Steel
Stain−
less
Steel
Selecting Wire, Gas and Control Settings for Aluminum