Miele DG4080 - Manual (Page 16)

Setting up the appliance
The steam oven will switch on
automatically when it is connected to
the electricity supply.
A welcome screen will appear in the
display and you will then be requested
to select some basic settings which are
needed to set up the appliance up for
using for the first time.
Follow the instructions in the display.
The welcome screen will be replaced
by the request to set a
language :
^ Touch one of the sensors next to the
arrows until the language you want
appears in the display.
^ Touch the sensor to the left hand side
of the language you want.
A tick L will appear beside the
language you have selected.
^ Confirm your selection by touching
the sensor next to "Continue" (the
lowest of the three sensors beside
the display on the right hand side).
The request to select a Clock format
will appear. The default setting for the
clock is 24 h.
^ Touch the sensor next to the clock
format you want.
^ Touch the sensor next to "Continue" to
confirm your selection.
You will then be requested to set the
Time .
You can either use the sensors next to +
and - or the numerical keypad to enter
the time.
^ Enter the hour and confirm with
"Continue".
^ Then enter the minutes and confirm
with "Continue".
If you are using the keypad to enter the
time you can enter the minutes immedi-
ately after entering the hour.
You will then be asked if you want the
display to
Always show the time or for
the time of day to be displayed only
when the appliance is switched on.
^ Select the option you want.
After you have confirmed your selection
with "Continue", the display will show
messages to tell you that:
– your appliance is Miele|home
enabled.
– setting up for using for the first time
has been successfully completed.
Your steam oven is ready for use as
soon as you confirm the last message
with "OK".
Before using for the first time
16