Oven interior 44, Condensate tray, rack and cooking containers 44, Automatic door release 44 – Miele DG4080 User Manual

Page 44: Side runners 44, Cleaning and care, Oven interior, Condensate tray, rack and cooking containers, Automatic door release, Side runners

Advertising
background image

Oven interior

Dry the oven interior, oven interior roof,
door seal, drip channel, inside of the
door and the compartment for the water
container after each use. Use a sponge
or absorbent cloth to wipe off the
condensate which has built up.

Remove grease deposits with a mild
solution of washing up liquid and warm
water and wipe with clean water.

Over time, the floor heater can become
discoloured by drops of liquid. This
discolouration is easy to remove with a
proprietary cleaner for ceramic
surfaces, such as the Miele ceramic
hob cleaner (see "Optional
accessories"). Follow the
manufacturer's instructions. After
cleaning, wipe the area with a damp
cloth to remove any cleaning agent
residues.

The door seal can become porous and
brittle over time. If this is the case, it
should be replaced with a new seal.
Door seals can be ordered from the
Miele Spare Parts Department. See
back page for contact details. When
fitting a new seal, make sure the join is
at the top.

Condensate tray, rack and
cooking containers

The condensate tray, rack and cooking
containers should be washed and dried
each time they are used.

They are all dishwasher safe.

Automatic door release

Make sure that the door release does
not get clogged with food deposits.
Wipe off any deposits immediately with
a sponge and a mild solution of
washing up liquid and warm water.
Wipe with clean water.

Side runners

The side runners are easy to remove
which makes it easier to clean the sides
of the oven.

Proceed as follows:

^ Pull on the fixing knob to release it.

Remove the runner by first pulling it
to the side a and then out from the
back b .

The runners can be cleaned with water
and washing up liquid or in a
dishwasher.

To re-fit the runners, reverse the above
procedure. First fit them into the back of
the oven and then push them in at the
sides.

Cleaning and care

44

Advertising