Michelin X970 - Manual (Page 36)

You use this option to set:
• The Interface Language: this is the language in which the menus are displayed. The available languages are:
English US, English,French, German, Italian.
• The Voice Guidance Language: this is the language used in voice messages during Navigation. Here you have the
choice between 6 different languages: French, English, German, Spanish, Italian, American English.
If you select American English as Englis US (Voice Synthesis),you will activate the text to speech feature that will
guide you with instructions concerning road names, directions or road signs
• The Map Language: this is the local language the maps are displayed in (town names, street names, etc.): French
in France, Danish in Denmark, etc. In countries with several official languages (Switzerland, Belgium, etc.), this
function lets you switch from one language to another. You will then need to search for towns, streets, etc. in
the selected language. Your available choices are: E n g l i s h , French, German, Italian, Spanish.
• Click the left and right arrows to select your language.
Or
• Click the language in your chosen menu to display a list of available languages; then click the language you want.
• Click the up or down arrow to scroll through the whole list.
6.1.2 Units
• Click “Units”.
• Click the left and right arrows to select the distance unit you want to use to calculate routes and to display distances
on the Navigation screen. You can select: km (kilometres) or miles (1 mile = 1.609 km).
6.1.3 Configure Keyboard
• Click “Configure Keyboard”.
• Click the left and right arrows to choose the keyboard type displayed on the search screens. Azerty (French
system), ABC (alphanumeric) or qwerty (English system).
6.1.4 Hardware
• Click “Hardware”.
You can now access the following screens:
Power Status to check the battery charge.
Time
to change the system time.
Brightness to change the screen brightness.
6.1.4.1 Battery Power Status
This screen gives the percentage of “Battery remaining” or, if the PND is connected, the screen displays the message:
“Charging… 100%”.
• Click “Power Status” to display the battery charge.
When ViaMichelin Navigation is removed from its mounting system, disconnected from the PC or from the
electrical supply, a small icon in the top bar at the top of the screen gives the level of battery charge.
Comment:
• Warning: There is a risk of explosion if the battery is replaced by a battery of an incorrect type.
• Dispose of used batteries in compliance with existing law in your country.
34