Michelin X970 - Manual (Page 96)

15_What to do if…
In this table, we suggest a few answers to frequently asked questions:
How can I perform a “partial” or
“soft reset”? A partial - or soft reset - restarts your ViaMichelin Navigation X-
970 if the application crashes.
To perform a soft reset, press the “Reset” point on the back of your
ViaMichelin Navigation X-970 (with an opened out paperclip, for
example).
The soft reset closes the application and restarts the ViaMichelin
Navigation software.
Comment:
Only procedures running at the time of the reset may be lost (e.g.
the current route).
How do I perform a “full” or
“hard reset”? A full - or hard reset - restores your ViaMichelin Navigation
X-970 to its initial conditions.
After this operation, you will need to reinstall the software.
To perform a hard reset:
- connect your device to the cigarette-lighter cable, the USB cable
or a power cord.
- remove the SD card from the PND.
- perform a reset by pressing the “Reset” at the back of the device
then, just after doing so, press the ON/OFF button and keep it
pressed, without the card.
- after a few seconds a message and a countdown appear on the
screen. Keep the ON/OFF button pressed down until the end of
the countdown.
- put the SD card back into the PND and reinstall the ViaMichelin
Navigation program.
The device does not switch on
when I press the “ON/OFF”
button: Connect your device to the cigarette lighter cable or power
adapter for at least 4 hours to fully recharge your PND. If the
charge indicator diode does not switch on after several hours of
recharging and the diode does not switch to green, please contact
your reseller to have your device checked.
During navigation, the voice
messages are in another language: In the Main Menu, go to Options > General > Language and
select the Voice Guidance language you want.
How do I update my POIs? Use POI Manager to download and add your POI files from the
ViaMichelin web site:
http://www.ViaMichelin.com
What is the difference between
the Shortest and the Quickest
route? When preparing a route, it is possible to specify that the system
should calculate the journey on the basis of the criterion “Quickest
route” or “Shortest route”.
The “Shortest route” criterion selects the most direct road
journey between the points of departure and arrival.
The “Quickest route” calculates the shortest route on roads
which have the highest average speeds.
For more information, please see
Section 10_NOTES AND TIPS
4