Removing a computer from the scanning sequence, Constantly displaying the confirmation label, The kb column – Minicom Advanced Systems Minicom Supervisor Phantom User Manual
Page 12: The ms column
The hotkey functions
2-6
Removing a computer from the scanning sequence
To remove a computer from the scanning sequence:
1.
Type 000 in the SCN column.
2. Press
Esc.
Constantly displaying the Confirmation label
To constantly display the computer Confirmation label:
1.
Type 999 in the DSP column.
2.
Press Esc.
The KB column
The KB column shows the keyboard mapping settings. Set the KB mapping for each computer according to its
operating system.
The default KB mode is PS, which is the standard keyboard mapping for Windows and Linux based operating
systems.
For a UNIX operating system using a standard PS/2 keyboard, set the KB mapping as follows:
• U1 for HP UNIX and SGI
• U2 for Alpha UNIX and Open VMS
To change the KB column from PS to U1 or U2:
1.
Navigate to the KB field by using the Tab or Arrow keys.
2.
Press the Spacebar. The display interchanges between PS, U1 and U2. Find the desired setting.
3. Press
Esc.
The MS column
The Phantom system automatically detects the mouse types, and configures the system accordingly.