Minicom Advanced Systems Minicom Supervisor Phantom - Manual (Page 24)

The View menu
4-4
Communication Error
If a Communication Error box appears when trying to scan the system – see Figure 4-3.
Figure 4-3 Communication Error
Check that:
• The RS232 Serial cable is connected to the computer’s and Phantom Manager’s serial ports.
• The Com Port settings in Options / Com Port are set correctly. After changing the Com port exit and re-enter
the Control software.
The View menu
From the View menu choose to display:
• All computers, or only active switched on computers.
• The Legend
• The toolbar
Selecting a computer
To select a computer:
Click on the computers icon. The system switches to that computer. The connected icon appears with a red
background . Control and monitor the selected computer from the keyboard and mouse connected to the
Phantom Manager.