Minicom Advanced Systems Minicom Supervisor Phantom - Manual (Page 37)

Verifying the Remote version number
6-4
Manager
box
Figure 6-5 The OSD Manager option
The H/W Version button is grayed out, as there is no hardware relevant to the OSD.
The Phantom Manager version number
To verify the Phantom Manager version number:
1. Open the Phantom Update program.
2. Activate the Firmware Upgrade mode on the Manager OSD.
3. In the Manager Unit box, check the Phantom Manager option.
4. Click . The firmware version number appears in the Manager Unit box.
5. Click . The hardware version number appears in the Manager Unit box.
Verifying the Remote version number
Before you can check a remote computer, you must uncheck the Manager Unit box options.
To verify the Remote version number:
1. Open the Phantom Update program.
2. Activate the Firmware Upgrade mode on the Manager OSD.
3. Check one or more or all of the remote computers.
4. Click . The firmware version number appears after the computer number.
5. Click . The hardware version number appears after the computer number.
When “Not responding” appears, there is no computer connected, or it is switched off.
Obtaining new firmware
Download the latest firmware for your system from http://www.minicom.com/phandl.htm .