Minicom Advanced Systems Minicom Supervisor Phantom - Manual (Page 22)

The View menu
4-2
SD P110
ww
w.
m
in
ic
o m
.c
o m
USER COMPUTER
SYSTEM SERVICE POWER 85-
2 65V
A C
5
0 /6
0 H
z
To
System
Out port
To Phantom Remote
System In port
Shielded CAT5
FTP cable
To computer’s Serial port
Computer screens
appear here
Control software
installed here
To Service
connector
RS232 Serial
cable
Figure 4-1 The UPM with the RS232 Serial cable
Installing and running the Control software
Note! The Phantom system must be fully connected BEFORE running the Control software. Failure to first
connect the system will lead to the software working in demo mode.
Start the Marketing & Documentation CD and choose Phantom Utilities Softpack. The Phantom Softpack
window appears.
To install the software choose Install Phantom RS232 Control Software. Once the software is installed, a
shortcut icon appears on the Desktop .
To run the software double-click
Or choose Start / Programs / Phantom RS232 Control / Phantom RS232 Control.