Minicom Advanced Systems 5UM20114 - Manual (Page 16)

SMART CAT5 SWITCH 16 IP
.
15
Pressing the button usually leads to a fast sync, except when the
KVM port or the video mode recently changed.
15. Mouse synchronization limitations
Synchronization may not work properly in the following cases:
1. For the intelligent sync to work, the picture MUST be correctly adjusted. Use
the auto adjustment function or the manual correction in the Video Settings
panel to adjust the picture. The video must also be of sufficiently good quality.
2. Special vendor-specific Mouse drivers disrupt the synchronization process.
Ensure these are not on the host system.
3. For Windows XP and 2003 Server
For Windows XP and 2003 Server deactivate Enhanced pointer precision.
To do so:
From the Control Panel select Printers and Other Hardware. Click the
Mouse icon. The Mouse Properties box appears. See Figure 9. Select the
Pointer Options tab.
Figure 9 Pointer tab
The Motion section slider bar must be in the center, and the Enhanced
pointer precision box must be unchecked. Click OK to save changes.
For Windows 2000 Pro and 2000 Server
For Windows 2000 Pro and 2000 Server deactivate Mouse Acceleration.
To do so:
From the Control Panel select Mouse. Select the Motion tab. See Figure 10.