Minicom Advanced Systems 5UM20114 - Manual (Page 58)

SMART CAT5 SWITCH 16 IP
.
57
Figure 40. Lines with blue text show active computers. Lines with grey text show
inactive computers. The Type column indicates whether a computer “C” or
another switch “S” is connected to the port.
Port number
appears here
Instruction
keys
C=computer
S=switch
Figure 40 The OSD Main window
42. Navigating the OSD
To navigate up and down use the Up and Down arrow keys.
To jump from one column to the next (when relevant) use the Tab key.
To exit the OSD or return to a previous window within the OSD press Esc.
43. Selecting a computer
To select a computer:
1. Navigate to the desired computer line.
2. Press Enter. The selected computer is accessed. A Confirmation label appears
showing which computer is accessed.
Note! When the OSD is displayed you cannot select computers using the
keyboard hotkeys.
44. The OSD settings - F2
Press F2. The OSD Settings window appears see Figure 41.