Minicom Advanced Systems 5UM20114 - Manual (Page 47)

OPERATING GUIDE
.
46
• Currently active users with login time (login time is only valid if time is
synchronized on Smart 16 IP)
• Server's power state
• The following actions can be initiated via SNMP:
• Reset server
• Power on/off server
• Reset Smart 16 IP
The following events are reported by Smart 16 IP via SNMP:
• Login trial at Smart 16 IP failed
• Login trial at Smart 16 IP succeeded
• Denying access to a particular action.
• Server was reset.
• Server was powered on/off
From the Smart 16 IP Menu choose SNMP settings. The SNMP Settings appear.
See Figure 32.
Figure 32 SNMP settings
You can change the following parameters:
Enable SNMP Agent - When checked, Smart 16 IP will answer to SNMP
requests. If a community is blank, you cannot perform the request. E.g. if you
want to disable the possibility to reset Smart 16 IP via SNMP, don't set a write
community.