Philips Magnavox VRX262AT - Manual (Page 15)

3
TIME 02 :15 PM
MONTH – – / – – / – –
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
Setting the Clock 15
1
Press the MENU button to bring up the main menu display.
Setting the Clock
Follow the steps below to set your VCR’s clock. Make sure:
● The VCR is on and the VCR light appears on the display panel.
(If it does not, press the VCR/TV button once.)
● You make each entry within 60 seconds of the previous entry.
If you do not, you may start over.
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 SET CLOCK
TO END PUSH EXIT
2
Press the Number 4 button to select SET CLOCK. Then,
press the Number 1 button to select SET CLOCK.
SET CLOCK
1 SET CLOCK
2 DAYLIGHT SVG TIME [ON]
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
3
Press two Number buttons for the hour(s) and two
Number buttons for the minute(s). Then press 1 for AM
or 2 for PM. For example, for 2:15 PM, press 02, 15, 2.
4
Press two Number buttons for the month, two Number
buttons for the day, and two Number buttons for the
year. For example, for July 1, 1997, press 07, 01, 97. The day of
the week will appear automatically.
TIME 02 :15 PM
DATE 07 / 01 / 97
TUE.
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
5
Press the STATUS/EXIT button to start the clock. The
screen will return to the program you were watching.
1
2
4
5
• Enter a 0 before a single digit num-
ber.
• Entries that do not match the VCR’s
internal calendar will cause a ques-
tion mark (?) to appear on-screen.
• To make corrections, press the
CLEAR button until the space for the
number you want to correct is flash-
ing. Then enter the correct number.
• The current time will appear on the
VCR display panel when the clock is
set. The current time will also
appear on-screen if you press the
STATUS/EXIT button. (See page 20
for details.)
• To reset the clock, follow the steps
on this page.
• Power failures that last for more
than one minute can cause you to
lose your clock setting. If this hap-
pens, repeat the steps on this page.
• If you press the STATUS/EXIT but-
ton while you are setting the clock,
the TV screen will return to the pro-
gram you were watching. If this hap-
pens, start over.
Helpful Hints
REW
PLAY
POWER
VCR PLUS+
SPEED
VCR/TV
EJECT
CHANNEL
REC/OTR
STATUS/EXIT
SLOW PAUSE/STILL
MENU CLEAR MEMORY
STOP
F.FWD
1 2 3
4 5 6
7 8 9
0 +100
TIME SEARCH