Helpful hints – Philips Magnavox VRX262AT User Manual

Page 35

Advertising
background image

ONE TIME PROGRAM
PROGRAM

1

CHANNEL

9

TIME ON

10:30 PM

TIME OFF

11:30 PM

REC SPEED

SLP

SP=1 LP=2 SLP=3

START DATE

10/10/97
FRI.

TO END PUSH EXIT

Timer Recording With the VCR Plus+ Programming System (cont’d) 35

• To quit the VCR Plus+ program-

ming system at any time, press the
STATUS/EXIT button. The display
will disappear from the TV screen.

• If the preset time for a timer

recording comes up during an OTR,
the OTR has priority.

• To stop a started timer recording,

press the STOP/EJECT button on
the VCR.

• If the power fails for more than one

minute, programmed timer record-
ings may be lost. Reset the clock
before re-programming the timer
recordings.

• If you have a Cable Box, timer

recordings are programmed differ-
ently. See page eight for details.

See page 46 for more notes.

Helpful Hints

4

Press the Number 1 button to record in SP speed, press
the Number 2 button to record in LP speed, or press the
Number 3 button to record in SLP speed.
For details, see
pages 30 and 48.
You cannot use the (Tape) SPEED button at this time. Your choice
will appear to the right of REC SPEED (but SP=1, LP=2, and SLP=3
will continue to flash).

The VCR must be off for a

timer recording to take

place! Make sure there is a

tape in the VCR.

5

Press the STATUS/EXIT button. PROGRAM WAS COM-
PLETED / PLEASE TURN OFF VCR FOR TIMER RECORDING
should appear on the screen. After three seconds, the on-screen
display will disappear.

6

Press the POWER button to turn off the VCR power. The
Timer light will appear. The Timer light will flash if there is not a
tape in the VCR.
If the timer recording will take place several hours or days from
now, you may use the VCR until time for the recording. Just turn
off the VCR a few minutes before the recording starts.
The VCR must be turned off for a timer recording to take
place.
If you forget to turn off the VCR, PLEASE TURN OFF
VCR FOR TIMER RECORDING flashes on your TV screen two
minutes before a timer recording starts. You can remove the mes-
sage by pressing the CLEAR button.

4

5

6

REW

PLAY

POWER

VCR PLUS+

SPEED

VCR/TV

EJECT

CHANNEL

REC/OTR

STATUS/EXIT

SLOW

PAUSE/STILL

MENU

CLEAR

MEMORY

STOP

F.FWD

1

2

3

4

5

6

7

8

9

0

+100

TIME SEARCH

Advertising