Before using your vcr 5 – Philips Magnavox VRX262AT User Manual

Page 5

Advertising
background image

In this VCR, use only tapes with the mark.

Make sure any light adhesive stick-on notes are removed from
the video cassette tape before putting the tape in the VCR.
Removable labels like these can jam the VCR.

Periodic maintenance is required to maintain your VCR’s con-
tinued excellent performance. The video heads will eventually
require cleaning or replacement. Cleaning or replacement of
the video heads should be performed by an authorized service
center.

Before Using Your VCR 5

Putting Batteries in the Remote Control

1

Remove the battery compartment lid on the bottom of the
remote control by sliding it in the direction of the arrow.

2

Insert two AA batteries inside the battery compartment with
their polarities (+ and – ends) aligned as indicated.

3

Replace the battery compartment lid.

Using the Remote Control

Point the remote control at the VCR’s remote sensor (see page
22) when using the remote control to operate the VCR.

Do not put objects between the remote control and the VCR.

Video cassette tapes have record tabs to ensure that recordings
are not accidentally erased.

1

To prevent accidental erasure, break off the tab with a screwdriv-
er.

2

To record again, cover the hole with cellophane tape.

Erasure Prevention

VCR maintenance

• The remote control and its batteries

are supplied.

• Do not mix alkaline and man-

ganese batteries.

• Do not mix old and new batteries.

Helpful Hints

1

3

2

1

2

Advertising