Philips Magnavox VRX262AT - Manual (Page 24)

24 Playing
• If the tape you want to play is
already in the VCR, make sure the
VCR power is on and the VCR light
is on, then press the PLAY button.
• Other playback options and fea-
tures are on pages 37-41.
Helpful Hints
Read and follow the steps below to play a tape.
1
Turn the TV on and set it to channel 3 or 4, whichever the
CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape in the VCR. The power will come on. The VCR
will place itself in VCR position automatically (the VCR light and
the Cassette-Inside light on the display panel of the VCR will
appear). If the tape’s record tab has been removed, playback will
start automatically.
6
When playback is stopped, press the EJECT button on the
remote control or the STOP/EJECT button on the VCR
again to remove the tape.
3
If playback does not start automatically, press the PLAY
button to start playback.
4
Press the STOP button on the remote control or the
STOP/EJECT button on the VCR once to stop playback.
5
Press the REW(ind) button on the remote control or the
REW(ind) button on the VCR to rewind the tape.
3
4
5
1 Turn on the TV.
2 Insert a tape in the VCR.
6
REW
PLAY
POWER
VCR PLUS+
SPEED
VCR/TV
EJECT
CHANNEL
REC/OTR
STATUS/EXIT
SLOW PAUSE/STILL
MENU CLEAR MEMORY
STOP
F.FWD
1 2 3
4 5 6
7 8 9
0 +100
TIME SEARCH