MicroNet Technology SP5001A/S - Manual (Page 18)

2. Enter the Proxy Server’s IP address or URL. For example, 220.130.173.70 or
sip.micronet.info
3. Enter the Line Number
4. Enter the Account. It can be same as the Line number, the user name or the
e-mail account. Check with your VoIP service support for the details.
5. Enter the Password
6. Click button
7. Select [Commit Data] and click button.
8. Select [Reboot System] and click button.
After reboot the SP5001A/S, check the Status LED, it shows the gateway has
registered to the SIP server successfully when the LED stays on. If not, the Status
LED is blinking, check the Internet connection and SIP Configuration settings again.
17