MicroNet Technology SP5001A/S - Manual (Page 82)

6.18. [phone]
Gateway progress tone is configurable. Default tone value is set according to U.S.
tone specification. Users may adjust the values according to their own country’s tone
specification or users-defined tone specification.
usr/config$ phone
Phone ringing , ringback tone , busy tone , dial tone setting and notes
Usage:
phone [-ring [freq ] [ringON ] [ringOFF ] [ringLevel]]
[-rbt [freqHi ] [freqLo ] [freqHiLev] [freqLoLev]
[Tone1ON] [Tone1OFF] [Tone2ON ] [Tone2OFF ]]
[-bt [freqHi ] [freqLo ] [freqHiLev] [freqLoLev]
[Tone1ON] [Tone1OFF] [Tone2ON ] [Tone2OFF ]]
[-dt [freqHi ] [freqLo ] [freqHiLev] [freqLoLev]
[Tone1ON] [Tone1OFF] [Tone2ON ] [Tone2OFF ]]
[-flash [freqLo ] [freqHi ]]
[-level [loopCurrentLevel] [onhookLineVoltageLevel ]]
phone [-print [ring]|[rbt]|[bt]|[dt]|[flash]]
-print Display phone ringing/tone configuration.
ring : ringing
rbt : ringback tone
bt : busy tone
dt : dial tone
flash: flash tone
-ring ringing configuration set .
-rbt ringback tone configuration set .
-bt busy tone configuration set .
-dt dial tone configuration set .
-flash flash configuration set .
-level Loop Current and On-Hook Line Voltage level set .
Note:
ringing frequency : 15 ~ 100 (Unit : Hz)
ringing ring ON/OFF : 0 ~ 8000 (Unit : ms)
ringing level : 0 ~ 94 (Unit : V)
tone frequency : 0 ~ 65535 (Unit : Hz)
tone freqLevel : 0 ~ 65535 (Unit : mVrms)
tone Tone ON/OFF : 0 ~ 8000 (Unit : ms)
level loopCurrent : 0 ~ 7 (20mA ~ 41mA, Step : 3mA)
level OnHookVol : 0 ~ 63 ( 0V ~ 94.5V, Step : 1.5V)
Example:
phone -print rbt
phone -ring 20 2000 4000 94
phone -rbt 480 440 125 105 2000 4000 2000 4000
phone -bt 620 480 125 105 500 500 500 500
phone -dt 440 350 96 96 8000 0 8000 0
phone -flash 400 800
phone -level 1 32
81