Peer-to-peer mode setup, Etup – MicroNet Technology SP5001A/S User Manual
Page 19
Advertising
2.4. Peer-to-Peer Mode Setup
P2P Mode doesn’t require any centralized control units like Proxy Mode does, it makes
communication between two end-points directly, [Phone Book] needs to configure to
work with in P2P Mode. It requires direct public IP access, it can also perform the job
behind the NAT device with static public IP connection, but it can not work behind the
NAT device with the dynamic IP connection.
1. Select the [SIP Information] at the Configuration Menu section
18
Advertising