MicroNet Technology SP5001A/S - Manual (Page 25)

Setup the SP5001A/S:
1. Open the web browser to connect the gateway and select the [Network
Interface]
2. Change the WAN IP Address, assign the IP address depends on your router
settings, for example: 192.168.1.8
Note:
The static IP must configured in this application
3. Change the Subnet Mask if necessary, for example: 255.255.255.0
4. Change the WAN IP Address. Here means your router’s LAN IP address, for
example: 192.168.1.1
5. Select the [IP Sharing] and enable
6. Enter the IP Sharing Server Address, here means your router’s WAN IP
address, for example: 61.219.198.204
7. Click the button
24