Minicom Advanced Systems Smart IP Extender - Manual (Page 23)

USER GUIDE
22
All messages are broadcast to ALL connected users. There is no option to direct a
message to a particular user only. There is no message history, so messages can only
be received after opening the Remote Console.
31. The Video settings
From the Options menu choose Video Settings. The Video Settings box appears. See
Figure 15.
Figure 15 The Video settings
The parameters have the following functions:
Brightness - Brightness control.
Contrast Red/Green/Blue- RGB contrast control.
Black level - Sets the intensity of the color black.
Clock - Sets the horizontal frequency for a video line, this depends on the video
mode. Different video cards may require different values. The default settings and
auto adjustment procedure should be adequate for all common configurations. If not
change this setting together with the sampling phase.
Phase - Sets the phase for video sampling.
Horizontal Offset - Moves the picture in a horizontal direction.
Vertical Offset - Moves the picture in a vertical direction.
Brightness, Black level and contrast affect all modes and KVM ports globally; the
other settings are changed specifically for each mode on each KVM port.