Minicom Advanced Systems Smart IP Extender - Manual (Page 39)

USER GUIDE
38
Using a function. allow access means you can use it. deny access means you cannot
use it.
Group setting – Use the access rights inherited from the group(s), the user belongs
to.
3. Select the desired permission.
4. To add the right, click Add.
To remove the right, check the Delete Entry box.
5. Click Apply.
68. Network Settings
From the IP Extender Menu choose Network Settings. The Network Settings appear.
See Figure 25.
Figure 25 The Network Settings
In the Network Settings panel you can change the network parameters.
The initial IP configuration is usually done directly at the host system. However you
can also connect to the IP Extender using its pre-configured IP settings.
Warning! Changing the network settings of IP Extender may result in losing the
connection. If you remotely change the settings ensure that all values will give you
access to the IP Extender.