Minicom Advanced Systems Smart IP Extender - Manual (Page 50)

SMART IP EXTENDER
49
73. SNMP Settings
The following information is available via SNMP:
• Serial number
• Firmware version
• MAC address / IP address / Netmask / Gateway of LAN interface
• Configured users
• Currently active users with login time (login time is only valid if time is
synchronized on IP Extender)
• Server's power state
• The following actions can be initiated via SNMP:
• Reset server
• Power on/off server
• Reset IP Extender
The following events are reported by IP Extender via SNMP:
• Login trial at IP Extender failed
• Login trial at IP Extender succeeded
• Denying access to a particular action.
• Server was reset.
• Server was powered on/off
From the IP Extender Menu choose SNMP settings. The SNMP Settings appear. See
Figure 32.