Minicom Advanced Systems Smart IP Extender - Manual (Page 30)

SMART IP EXTENDER
29
The elements of the Keyboard & Mouse Settings are explained below.
Targeted KVM port
1. Choose the port to which a KVM switch is connected.
2. Press to display the current values for the selected KVM port. Without
pressing alterations will NOT be made to the chosen port.
Keyboard Model - Choose the keyboard model
Mouse Model - Choose the mouse model
Direct (1:n) mouse mode
Use a direct translation of mouse movements between the host and the remote
pointer. Fix a scale, which determines the amount the client mouse pointer moves
when the host mouse pointer moves by one pixel. This only works when Mouse
Acceleration on the local computer is disabled.
Automatic speed detection
When Mouse Acceleration on the local computer is enabled, check Automatic speed
detection. We highly recommend disabling the Mouse Acceleration.
G&D Equalizer – G&D Equalizer – This supports to the mouse synchronization
for Guntermann & Drunck KVM switches. These switches perform an internal
rescaling of the mouse movements, which cause the existing algorithm to break if IP
Extender is connected behind such a switch. This option detects the rescaling and
compensates for it, so that the mouse synchronization works. Choose auto or a
number from the drop down menu.
- Click to apply changes
- If the keyboard or mouse seems to react irrationally click to reset the
keyboard and mouse emulation. It is like disconnecting and reconnecting the
keyboard and mouse connectors.