MicroNet Technology SP907NL - Manual (Page 19)

16
Parameter Description
Authentication
Select the authentication type of the wireless access point or
wireless device in this field. When users are adding a profile
from an existing access point or wireless device,
authentication type will be selected automatically.
Encryption
Select the encryption type of the wireless access point or
wireless device in this field. When users are adding a profile
from an existing access point or wireless device, the
encryption type will be selected automatically.
WPA Preshared Key
User can select key type (Hexadecimal or ASCII) and input
WEP key in this field. If encryption is not enabled, or users
select ‘WPA’ as encryption type, this field will be disabled and
grayed out.
User can set up to 4 WEP keys here. There are two types of
WEP: Hexadecimal and ASCII. For Hexadecimal key, user
can input number 0-9 and alphabet a-f (Eg. 001122aabbcc).
For ASCII key, user can input number 0-9 and alphabet a-z
(Eg. mywepkey12345).
The length of WEP key depends on the type of WEP key
selected. User can input 10 or 26 hexadecimal characters and
5 or 13 ASCII characters as WEP key.
Show Password
Check this box and all passphrases or security keys inputted
will be displayed instead of replacing it with asterisk.
Use 802.1x
If the access point requires 802.1x authentication, please click
on ‘Use 802.1x’ box, then click ’802.1X’ tab to set parameters.
To set 802.1x authentication for the access point, please click ‘802.1X’ tab: