MicroNet Technology SP907NL - Manual (Page 20)

17
Parameter Description
EAP Method
Select ‘802.1x EAP method’ from dropdown menu. Please
ask the administrator of the access point for the correct EAP
method.
Tunnel Authentication
Select 802.1x tunnel authentication type from dropdown
menu. Please ask the administrator of the access point for
correct tunnel authentication method. This pull down menu is
only available when authentication type is 'PEAP', ‘TLS /
Smart Card', or 'TTLS'.
When users use 'EAP-FAST' as authentication type, the
protocol setting is always 'Generic Token Card' and cannot be
changed. Users also need to select ‘Soft Token’ or ‘Static
Password’ as password in ‘ID \ Password’ setting.
ID \ Password Tab
Input 802.1x username/password and other information if it is
required. Click ‘Show Password’ to show the password typed.
Client Certification
Tab
Use this tab to select a local certificate from dropdown menu.
If the access point requires a specific client certificate, the
certificate must be installed on the client computer.
Server Certification
Tab
Use this tab to use server-based certification. Please select a
CA (Certificate Authority) from dropdown menu. If
intermediate certificates are allowed, please select ‘Allow
intermediate certificates’. Also, if users need to specify CA
server’s name, they can specify it in ‘Server name’ field. User
can select ‘Server name must match’ so the CA server’s
name must be the same with the value set in ‘Server name’
field. If only the domain name part of full server name needs
to be the same value set in ‘Server name’ field, select
‘Domain name must end in specified name’.
After you complete all information related to the access point, click ‘OK’ to save
the profile, or click ‘cancel’ to stop the process.