MicroNet Technology SP907NL - Manual (Page 28)

25
When a profile is selected and click on ‘Activate’ button, an icon will be
displayed in front of the profile to show that the connection has failed. When the
connection is successfully established, an icon will be displayed.
3.2.6 Advanced Settings
This wireless network card provides several advanced settings for experienced
wireless users. Users can change these settings to increase data transfer
performance or change operation mode. Please follow the following instructions
to set advanced wireless settings.
Parameter Description
Wireless mode Display the wireless operation mode of the network card.
Enable Tx Burst
Check this box to accelerate the data transmit rate. It may not
work with all wireless access point and wireless devices.
Enable TCP Window
Size Check this box and the configuration utility will adjust TCP
window size automatically to get better performance.
Fast Roaming
Check this box to control the threshold for switching between
the wireless network card and another access point with
better signal quality. Only adjust value when the users need
to roam between multiple access points.
Show Authentication
Status Dialog
When the computer is being authenticated by wireless
authentication server, a dialog window with the process of
authentication will appear.