MicroNet Technology SP907NL - Manual (Page 42)

39
Parameter Description
Access Policy
Select the policy type of your access rule.
¾
Disable: Allow any wireless client with proper
authentication settings to connect to this access point.
¾ Allow All: Only allow wireless clients with MAC address
listed here to connect to this access point.
¾ Reject All: Reject wireless clients with MAC address
listed here to be connected to this access point.
MAC address
Input the MAC address of the wireless client you wish to allow
or reject here. No colon (:) or hyphen (-) required.
Add
Add the MAC address you inputted in ‘MAC address’ field to
the list.
Delete
Please select a MAC address from the list, then click ‘Delete’
button to remove it.
Remove All Delete all MAC addresses in the list.
Click <Apply> to save the changes.
4.4 MAC Table
If users want to see the list of all wireless clients connected to this access point,
please select ‘Mac Table’ tab from the utility.