MicroNet Technology SP907NL - Manual (Page 39)

36
Country Region Code
Please select the country code of the country or region.
Available options are 0-7, which will affect the available
wireless channels:
0: FCC (US, Canada, and other countries uses
FCC radio communication standards)
1: ETSI (Europe)
2: SPAIN
3: FRANCE
4: MKK
5: MKKI (TELEC)
6: ISERAL (Channel 3 to 9)
7: ISERAL (Channel 5 to 13)
Please note that only change the country code if the country
is different. For example, when operating this product in US,
only channels 1~11 can be operated. Selection of other
channels is not permitted under FCC regulations.
No forwarding among
wireless clients Check this box and wireless clients will not be able to share
data with each other.
Hide SSID
Check this box and the SSID will not be broadcasted to the
public. Your wireless clients must know the exact SSID to be
able to connect to the computer. This option is useful to
enhance security level.
Allow BW 40 MHz Check this box to allow BW 40MHz capability.
Tx BURST
Check this box to accelerate the data transmit rate. It may not
work with all wireless access point and wireless devices.
Beacon(ms)
Users can define the time interval that a beacon signal should
be send. Default value is 100.
TX Power
Users can select the wireless output power in this field.
Please select a proper output power setting according to the
actual needs. Users may not need 100% of output power if
other wireless clients are nearby.
Idle Time
Select the idle time for the wireless access point. Default
value is 300. Do not modify this value unless you know what
will be affected.
Click <Apply> to save the changes.
4.2 Security Setting
This wireless card supports wireless encryption in AP mode, which will encrypt
the data being transferred over the air to enhance data security level. It’s
recommended to enable data encryption unless the users wish to open the
computer (and its internet connection) to the public. When users click on
‘Security Setting’ in the utility, the following window will appear: