Monster Power HTPS7000 - Manual (Page 22)

14
STEP 10 Digital 1 & 2 AC Outlet Hookup
Isolated Monster Clean Power
™
Stage 5 Digital Filter: Optimized to reduce noise generated by digital
components. Isolates digital components from connected digital, analog audio and video components for maximum
rejection of interference. The HTPS 7000 features two isolated filters to accommodate different digital sources.
NOTE: You can plug any type of digital component (e.g., CD player, DVD player, cable TV box, digital camcorder)
into the corresponding CD, DVD, CABLE/SAT, SPARE outlet.
A) Attach a Monster
®
Power ID label to each component’s power cord before you plug it into the appropriate color-
coded PowerSource
™
outlet.
B) DVD: If you have a DVD player, plug its power cord into the corresponding DVD outlet. If you are using a
LaserDisc player, you can also plug it into this outlet. If you have a LaserDisc player and a DVD player, you can plug
either component into any of these four AC outlets designed for digital component.
C) CABLE/SAT: If you have a cable TV box, plug its power cord into the PowerSource's corresponding CABLE/SAT
outlet. If you are using a satellite receiver, plug its power cord into the same outlet.
D) CD: Plug your CD player's power cord into the corresponding CD outlet.
E) SPARE: Plug the power cord of your additional digital component (e.g. digital camcorder) into the corresponding
SPARE outlet.
Illustration of rear panel showing Digital Filter 1 and 2