Monster Power HTPS7000 - Manual (Page 32)

24
TROUBLESHOOTING (CONTINUED)
Possible Cause #2
The PowerSource is plugged into a switched outlet on a component which is not turned on. The PowerSource will
not receive power and therefore will not provide power to the components plugged into the PowerSource outlets.
Possible Solution:
• Turn the component on.
NOTE: For the best possible performance, plug the PowerSource into a wall outlet, not an outlet on another
component.
Possible Cause #3
The PowerSource is defective.
Possible Solution:
• Please see page 31 for warranty information.
PROBLEM - Speakers emit a humming or buzzing noise.
Possible Cause:
The PowerSource is sharing AC power with equipment that’s not properly grounded.
Possible Solution:
• Connect your PowerSource to a dedicated outlet.