Motorola CAJUN P880 - Manual (Page 16)

1 - 6 Cajun P880 Routing Switch Installation Guide
1
Installing the Chassis
The system can be installed by rack mounting the system.
Rack Mounting the
System * Note: It is recommended that you remove the power supplies
prior to rack mounting the Cajun P880. You can use an
empty power supply slot as a hand-hold when lifting the
chassis.
Chassis weights are:
■
The Cajun P880 chassis with one supervisor, no media
modules or power supplies weighs 39kg (85 lbs.).
■
The Cajun P880 chassis containing one supervisor, three
power supplies and no media modules weighs 57 kg (125
lbs.).
■
The Cajun P880 chassis, containing one supervisor, three
power supplies and 16 media modules weighs 80 kg (175 lbs).
WARNING
Safe rack mount installation requires two people. It is
recommended that gloves be worn when lifting the chassis.
To rack mount the system:
1. Remove the power supplies from the chassis (see "Removing a
Power Supply" for more information).
2. Check that all pre-installed modules are securely installed:
—
Check that the supervisor module is firmly installed.
—
Check that the Switch Element and switch contoller cards
are firmly installed.
— Check that the fans are securely in place (tighten the
captive screws).