Motorola CAJUN P880 - Manual (Page 27)

Cajun P880 Routing Switch Installation Guide 1 - 17
Installing the Cable Management Bracket
The P880 comes with a cable management bracket. You attach this
bracket to the right side of the chassis. To install attach the Cable
management bracket:
1. Remove the plastic piece from the right side of the chassis.
2. Line the bracket up with the ball studs and screw holes and push
until it locks into place (Figure 9).
3. Tighten the captive screws.
Figure 9. Installing the Cable Management Bracket
4. Thread the cables through the bracket to secure.