Motorola CAJUN P880 - Manual (Page 22)

1 - 12 Cajun P880 Routing Switch Installation Guide
1
Figure 6. Removing Power Supply Filler Panel
Connecting the Power Supplies
Before connecting the power cords:
■
Make sure that all of the power supplies are seated firmly,
with the captive screws tightened.
■
Make sure that all of the ON/OFF switches on the power
supplies are OFF. (O)
■
If you are using multiple power supplies to ensure
redundancy, make sure that there is a dedicated power circuit
available for each supply. The separate power sources help
ensure operation when the power source itself fails.
To connect the power supplies:
1. Plug the power cord into each power supply (Figure 5).
2. Plug the power cord into an AC outlet.