Door talk, Audio source buttons, Cleaning the zone keypad – M&S Systems XDM4600 User Manual

Page 10

Advertising
background image

M&S Systems | 800.421-1587 | www.mssystems.com

5

XDM

4600

• Release the TALK button when you are finished.

• When you press TALK, the music/audio to all zones is muted.

Door Talk

Allows users to talk and listen to visitors at the front door.

• Press TALK and LISTEN simultaneously to enter Door Talk mode. This allows you to talk to the

Door Stations. All other stations can hear the conversation.

• Release the TALK and LISTEN buttons to listen to the Door Station. The Listen mode is active for a

total of 25 seconds after you release the TALK and LISTEN buttons. You may talk again at any time

by pressing TALK and LISTEN. Each time the buttons are released, you can listen for another 25

seconds, or until any zone button is pressed.

• Door Talk mode is suspended at the end of the 25-second listening period, or if another button is

pressed, except for LISTEN or VOLUME, on any keypad.

Audio Source Buttons

The six audio source buttons and one LOCAL button on the Zone Keypad allow users to select an audio

source for a local zone or for all zones (Party Mode). When a source is selected, the blue backlight behind

that button intensifies.

Note: You cannot control the details of the audio sources themselves using a Zone Keypad. (i.e. you
cannot change a CD track or a radio station.) However, if you have a programmed XDM46R Universal

Remote for specific functions, like CD track changing, you can control the specific functions using the

universal remote control.

The audio source buttons are:

• TUNER

• SAT/CAB (Satellite and Cable)

• CD1

• CD2

• DVD

• MUSIC—Any auxiliary audio source that is connected to the Central Controller

• LOCAL—You can connect an audio source in each zone to the Zone Keypad. This source is available

to the local zone only and is not accessible by the entire system in Party Mode.


To select an audio source:

1.

For a local zone, press and release the audio source button you prefer.

2.

To play an audio source to all zones (Party Mode), press and hold, for 3 seconds, the audio source
button you prefer.

Cleaning the Zone Keypad

Clean the zone keypad carefully using a cloth dampened with water only. Do not use any chemicals or

spray cleansers.

115951B.pdf 10

115951B.pdf 10

12/16/2005 8:06:46 AM

12/16/2005 8:06:46 AM

Advertising