Installing a local audio source wall plate – M&S Systems XDM4600 User Manual

Page 27

Advertising
background image

M&S Systems | 800.421-1587 | www.mssystems.com

22

XDM

4600

Installing a Local Audio Source Wall Plate

With the optional Wall Plate, you can connect a local audio source; such as a child’s own CD player or

television, to the local Zone Keypad. Audio from the local source is accessible through the local Zone
Keypad only. It is not available for Party Mode. See

Figure

14

for a wiring schematic.

• Do not install Wall Plates in stud cavities that contain 120/240V appliance wiring, or within 18 inches

of fluorescent lighting, dimmers, security wiring, and other control wiring.

• The wall plate is installed in a single gang electrical box.

• The wall plate uses a CAT 5 cable to connect to the keypad.

• Do not place Wall Plates in air return cavities or walls that contain plumbing.

• Place Wall Plates within six feet of the Zone Keypad. The Wall Plate can be located farther away, but

may result in adding noise to the system.

• Place the Wall Plate at the same height from the floor as household electrical outlets.


Figure 14—Optional Local Audio Source Zone Wall Plate

115951B.pdf 27

115951B.pdf 27

12/16/2005 8:06:48 AM

12/16/2005 8:06:48 AM

Advertising