Installing the central controller – M&S Systems XDM4600 User Manual
Page 18
M&S Systems | 800.421-1587 | www.mssystems.com
13
XDM
4600
Figure 7—XDM4600KIT Wiring Scheme. NOTE for detailed Keypad wiring refer to figure
10 under installing zone keypad section of the manual.
Figure 7 shows the system wiring schematic for the Central Controller (XDM46CC), four Zone Keypads
(XDM46K) and their speaker pairs.
How to read the schematic:
•
CAT-5 cables are shown connecting the Central Controller to the Zone Keypads and the Door
Station.
•
16-gauge, 2-conductor power wire is shown connecting the Central Controller to the Zone Keypads
and 18-guage, 2-conductor speaker wire connecting the Zone Keypads to their speakers.
•
At the top of the Central Controller, the line going from the Central Controller in the direction of
the Expansion Hub represents the connection cable.
Installing the Central Controller
The Central Controller has six analog audio inputs for sourcing music to the system. Communication
between the Controller and the zones is digital.
115951B.pdf 18
115951B.pdf 18
12/16/2005 8:06:47 AM
12/16/2005 8:06:47 AM