Microsoft C4500 - Manual (Page 29)

When a Message Appears
21
2
File being stored
exceeded max.
number of pages
per file. Copying
will be stopped.
The scanned originals
have too many pages to
store as one document. Press [Exit], and then store again with
an appropriate number of pages.
Magazine or Book-
let mode is not
available due to
mixed image mode.
You selected the Maga-
zine or Booklet function
for originals scanned us-
ing different functions,
such as copy and printer. Make sure originals for the Magazine
or Booklet function are scanned using
the same function.
You do not have
the privileges to
use this function.
This user code is not al-
lowed to use the function
selected. Contact the administrator.
You do not have
the privileges to
use this function.
This user code is not al-
lowed to use the function
selected. If the message continues to be displayed
and you cannot switch the screen, press
the {Energy Saver} key. Confirm that the
display goes off, and then press the {En-
ergy Saver}
key again. The display will
return to the user code entry display.
When printing under the copier or print-
er function, press the {Energy Saver} key
only after printing has finished.
Authentication
has failed.
The entered login user
name or login password
is not correct. Inquire the user administrator for the
correct login user name and login pass-
word.
Authentication
has failed.
The machine cannot per-
form authentication. Contact the administrator.
The selected
file(s) contained
file(s) without
access privileg-
es. Only file(s)
with access priv-
ileges will be
deleted.
You have tried to delete
files without the authori-
ty to do so. Files can be deleted by the person who
created the file. To delete a file which
you are not authorized to delete, con-
tact the person who created the file.
Orig. is being
scanned by anoth-
er function.
Please wait.
Document Server or
Scanner function is in
use. To cancel the job in process, press [Exit],
and then press the {Document Server} or
{Scanner} key. Next, press the {Clear/Stop}
key. When the message “
The Clear /
Stop key was pressed. Are
you sure you want to stop
scanning? ” appears, press [Cancel].
Message Cause Solution