Microsoft C4500 - Manual (Page 45)

When a Message Appears
37
3
Check whether
there are any
network problems.
{
14-09
}
E-mail transmission was
refused by SMTP authen-
tication, POP before
SMTP authentication or
login authentication of
the computer in which
the folder for transfer is
specified. • Check that the machine e-mail ad-
dress is correctly programmed from
File Transfer under System Settings.
See “File Transfer”, General Settings
Guide. You can also use the Web
Image Monitor for confirmation.
See the Web Image Monitor's Help.
• Check that the user name and pass-
word of the E-mail Account are cor-
rectly programmed from File
Transfer under System Settings. See
“File Transfer”, General Settings
Guide. You can also use the Web
Image Monitor for confirmation.
See the Web Image Monitor's Help.
• Check that the user ID and pass-
word for the computer in which the
folder for forwarding is specified
are correctly programmed.
• Check that the folder for forwarding
is correctly specified.
• Check that the computer in which
the folder for forwarding is speci-
fied is correctly operated.
• Consult the administrator.
Check whether
there are any
network problems.
{ 14-33 }
No machine's e-mail ad-
dress is programmed. • Check that the e-mail address of
mail account is correctly pro-
grammed using “File Transfer” of
“System Settings”. See “File Trans-
fer”, General Settings Guide. You
can also use the Web Image Monitor
for confirmation. See the Web Image
Monitor's Help.
• Consult the administrator.
Check whether
there are any
network problems.
{ 15-01 }
No POP3/IMAP4 server
address is programmed. • Check that the host name or IPv4
address of the POP3/IMAP4 server
is correctly programmed using the
Web Image Monitor. See the Web
Image Monitor's Help.
• Consult the administrator.
Check whether
there are any
network problems.
{ 15-02 }
Cannot log on to the
POP3/IMAP4 server. • Check that the user name and pass-
word of the E-mail Account are cor-
rectly programmed using File
Transfer under System Settings. See
“File Transfer”, General Settings
Guide. You can also use the Web
Image Monitor for confirmation.
See the Web Image Monitor's Help.
• Consult the administrator.
Message Cause Solution