MITSUBISHI ELECTRIC DX-TL5716U - Manual (Page 37)

33
Menu settings/Device registration
16 Recording/Stop button
When you click this button, recording starts and the
button illuminates. By clicking this button again, a con-
fi rmation screen is displayed. When you select [Yes],
recording stops and the button goes out.
17 Zoom button
When you click this button during single screen display
or single screen playback, the displayed image is en-
larged. Each time you click this button, the magnifi ca-
tion changed in the order of X1 X2 X4 normal
display. You cannot enlarge the image output from
Output B using the mouse operation screen.
To move the magnifi cation center point, click the shad-
ed areas shown below.
18 Triplex PB button
When you click this button while live image is dis-
played in the split display mode, the triplex playback
mode is activated and the camera number buttons are
displayed for 3 seconds. When you click any camera
number button, the playback image of the correspond-
ing camera is displayed. For notes for using the triplex
playback mode, see
page 44.
19 Bookmark button
When you click this button, the mouse operation
screen is closed and the <Bookmark menu> is dis-
played. When the playback device is designated as
Copy device, Archive device, or preliminary area, the
<Bookmark menu> is not displayed. (
Page 79)
20 Copy button
When you click this button, the mouse operation
screen is closed and the <Copy menu> is displayed.
Use this button to copy or archive data. (
Pages 80
to 83)
21 Search button
When you click this button, the mouse operation
screen is closed and the <Search menu> is displayed.
Use this button to search images. (
Pages 72 to 76)
22 Sequence button
When you click this button, the sequential display
screen is displayed and the button illuminates. By
clicking the button again, the sequential display is can-
celed.
23 PTZ button
When you click this button while live images are dis-
played, the recorder enters the PTZ mode. For opera-
tions in the PTZ mode, see
pages 45 and 46.
24 Output A/B button
When you click this button, the multiplexer output is
switched between A and B. Each time you click this
button, the multiplexer-related buttons are switched
between two monitors connected to the OUTPUT A
connector and OUTPUT B connector.
When Output B is selected, only the buttons for con-
trolling the multiplexer are displayed.
25 Exit button
When you click this button, the mouse operation
screen is closed.
26 Help button
When you click the button, the Help menu is displayed.
Notice
• When you click the button, the hidden buttons
are displayed. To hide the buttons being displayed,
click the
button.
• When the password lock is enabled, you can use the
buttons for unlocked operations only. (
Pages 117
to 120)
• The mouse operation screen automatically disappears
when you don’t operate the mouse for 1 minute.
• You cannot display warnings by pressing the HELP
button when they occur while the mouse operation
screen is displayed. Close the mouse operation screen
fi rst.
• In forward search/reverse search, the intended
playback speed may not be obtained when a heavy
load is imposed on the recorder or when the high-
speed data transmission is unavailable due to the use
of a DVD/CD, USB memory, or external HDD.