Meyer Sound MM-10 - Manual (Page 36)

CHAPTER 5: MM-10ACX SUBWOOFER
36
Dual Channel + Sub Channel (2.1)
To configure a 2.1 satellite system with one MM-10ACX and
two MM-4XPs:
1. Connect the left audio signal to Audio In for Satellite 1 on
the MM-10ACX.
2. Connect the right audio signal to Audio In for Satellite 2
on the MM-10ACX.
3. Connect the subwoofer audio signal to the Subwoofer
Audio In on the MM-10ACX.
4. Connect the Satellite Out 1 from the MM-10ACX to the
loudspeaker input of left MM-4XP.
5. Connect the Satellite Out 2 from the MM-10ACX to the
loudspeaker input of the right MM-4XP.
6. Set the Input Select switch on the MM-10ACX to
SUB CH (down).
7. If necessary, to accommodate for the placement of the
subwoofer and satellite loudspeakers, adjust the Input
Polarity switch and Gain knob on the MM-10ACX.
MM-10ACX Dual Channel + Sub Channel System (Shown with EN3 Connectors)
Balanced audio,
dual channels, to
Satellite 1 Audio In
and Satellite 2 Audio In
Balanced audio,
single channel,
to Subwoofer
Audio In
AC power
to AC Input
Satellite 1 Out and
Satellite 2 Out to MM-4XPs
(Balanced audio, 48 V DC)