Meyer Sound MM-10 - Manual (Page 50)

APPENDIX D: SPECIFICATIONS
50
MM-10XP Specifications
ENVIRONMENTAL
Operating Temperature 0° C to +45° C
Non Operating Temperature <–40° C or >+75° C
Humidity To 95% at 35° C
Operating Altitude To 4600 m (15,000 ft)
Non operating Altitude To 95% at 35° C
Shock 30 g 11 msec half-sine on each of 6 sides
Vibration 10 Hz – 55 Hz (0.010 m peak-to-peak excursion)
MM-10 Specifications (All Models)
MM-10XP Specifications
MM-10XP REAR PANEL
Audio/Power Connector Phoenix 5-pin male or EN3 5-pin male
(two pins for DC power, three pins for balanced audio)
Wiring Pin 1: DC power negative (–)
Pin 2: DC power positive (+)
Pin 3: Balanced audio shield, chassis/earth
Pin 4: Balanced audio (–)
Pin 5: Balanced audio (+)
Input Polarity Switch Reverses audio input polarity between pins 4 and 5
LED Displays loudspeaker status
MM-10XP DC POWER
Safety Agency Rated
Operating Range 48 V DC
Note: Tolerates voltage drops up to 30% with long cable runs.
MM-10XP Current Draw Note: At 48 V DC.
Idle Current 0.16 A rms
Maximum Long-Term

Continuous Current
0.90 A rms
Burst Current 2.5 A rms
Ultimate Short-Term

Peak Current
3.0 A peak
Inrush Current < 7.0 A peak
PHYSICAL
Enclosure Multi-ply hardwood
Finish Black textured
Protective Grille Hex-stamped steel with black mesh screen
Mounting Top and side nut plates available with 3/8”or M10 threads. MUB-MM10 U-bracket mounts the sub-
woofer on walls and ceilings at adjustable angles.
Dimensions 19” W x 11” H x 12” D
(483 mm x 279 mm x 305 mm)
Weight 26.7 lbs (12.11 kg)