Muratec QUADACCESS MFX-2590 - Manual (Page 113)

2-64 Specifying the Network Settings
„ Printing the LDAP Setting List
Press <Setting>.
1
Press
2
the [Management] tab.
If an administrator password is set,
3
press [Admin Password].
If an administrator password is not set, proceed to step 5.
Enter the administrator password, and press [Enter].
4
Press [Network Settings].
5
Press [LDAP Server Setting].
6
Press [List].
7
Select [ON] to enable duplex printing, or [OFF] to disable it.
8
Select [ON] to enable combined printing, or [OFF] to disable it.
9
Press [Yes].
10