Muratec QUADACCESS MFX-2590 - Manual (Page 129)

2-80 Mirroring the Machine Settings
Directly Copying Via the Network
When directly copying the data for the machine settings via the network, use the screen
of the destination machine.
Directly Copying Via the Network „
Press <Setting>.
1
Press
2
the [Management] tab.
If an administrator password is set,
3
press [Admin Password].
If an administrator password is not set, proceed to step 5.
Enter the administrator password, and press [Enter].
4
Press [Mirroring].
5
Press [Direct Copy].
6
Enter the IP address of the machine to copy from, and press [
7
Enter].