Muratec QUADACCESS MFX-2590 - Manual (Page 63)

2-14 Closed Communication
Communication and Range of Passcodes
Communication Range of Closed Transmission „
When closed transmission is set, fax messages cannot be transmitted to machines other •
than Muratec machines.
If the passcode set on your machine does not match the passcode set on the other •
machine, faxes cannot be transmitted. Refer to the following table (example of when the
passcode is set to “1234”).
The closed transmission function of this machine is not compatible with the closed •
transmission function of our earlier machines. If the destination machine has an earlier
version of the closed transmission function set, transmission cannot be performed even
if the passcodes match.
Passcode set in the
machine
Destination machine
(receiver machine)
Passcode set in other
machine
Result
Not set
(0000) Other brand machine – Communication errors
Our machine
(Without security function) – Communication OK
Our machine
(With security function) 0000 Communication OK
1234 Communication OK
5678 Communication OK
Set
(1234) Other brand machine – Communication error
Our machine
(Without security function) – Communication error
Our machine
(With security function) 0000 Communication error
1234 Communication OK
5678 Communication error
Note
When a communication error occurs, an error message is printed. The error is denoted
as error code “T.2.2”.