Muratec QUADACCESS MFX-2590 User Manual
Page 130
Mirroring the Machine Settings 2-81
1
2
Management
Select [Setting
8
only] to copy only the machine settings or [All] to copy all the
data, and press [Yes].
If you select [Setting
•
only], the user information is erased. If you select [All], the user
information is overwritten with the imported data.
Refer to the table in “
•
Importing to the Machine from USB Memory
” for the difference
between the settings imported when you select [Setting only] and the settings imported
when you select [All].
When the import process is complete,
9
press [Close].
When the machine information is imported, the machine is automatically restarted.
Allowing / Prohibiting Machine Setting Transmission Requests
You can set whether to allow machine setting transmission requests from other machines.
If you set [NotAllowed], data that indicates that transmission requests are prohibited are
sent to the machine that sent the transmission request.
Destination machine
Transmission request
Original machine
Prohibited
Set to
[NotAllowed]
Press <Setting>.
1
Press
2
the [Management] tab.
If an administrator password is set,
3
press [Admin Password].
If an administrator password is not set, proceed to step 5.
Enter the administrator password, and press [Enter].
4
Press [Mirroring].
5