Muratec QUADACCESS MFX-2590 - Manual (Page 56)

Setting Security Codes 2-7
1
2
Management
Setting the Protect Passcode
You can set a four digit number of your choice for the protect passcode. Make sure to
make a note of and store the number after setting it.
„ Setting the Protect Passcode
Press <Setting>.
1
Press
2
the [Management] tab.
If an administrator password is set,
3
press [Admin Password].
If an administrator password is not set, proceed to step 5.
Enter the administrator password, and press [Enter].
4
Press [Protect Passcode].
5
Enter the protect passcode using the numeric keys, and press [Enter].
6
Enter a four digit number.
Note
Make sure to make a note of and store the protect passcode you set so that you do not
forget it. It is also necessary to enter the protect passcode when disabling it.